1. Pny 64gb Flash Drive Not Recognized Expired
2. Pny 16gb Flash Drive Problems
3. Pny 64gb Flash Drive Not Recognized Usb
4. Pny 64gb Flash Drive Not Recognized Drive

Dec 16, 2020 • Filed to: USB Recovery • Proven solutions

The car recognizes the music folder on the flash drive, but it is not displaying the camera icon. Does anyone have any advice? I tried installing the flash drive directly into the usb drive (bypassing the cable splitter, in case there was a problem there), but the car still did not seem to recognize the TeslaCam folder.

64GB and 128GB Dual USB Drives come preformatted in exFAT file system and certain mobile devices do not support exFAT. In this case please format the drive in FAT32 file system. Formatting USB drives with third party tools Please insure the dual drive is fully inserted into the microUSB port on your mobile device. Why doesn’t my computer recognize the new drives on the desktop after I install the software and plug in the reader? Verify all connections are secure. PNY recommends connecting the USB reader directly to the USB port on the computer rather than daisy chained to another device or connecting to a hub.

• My only minor issue with it is that it detects slowly. Most flash drives (even my 64GB PNY Attache) detect right away and are usable within a 5 seconds of being plugged in. This one takes about 10 seconds, then windows shows a dialog about installing it, and 20-30 seconds after it.
• Occasionally, your Mac has already recognized the USB flash drive but not shown it on the desktop. Thus, you should go to Finder Preferences General and make sure the 'External disks' option is ticked. Then you'll see the USB flash drive showing up on Mac desktop. Change settings for Mac recognize an external hard disk in the Finder.

How Can I Fix my Flash Drive Not Recognized?

Question: 'My USB flash drive is not recognized when I plug it to the computer. What causes such a problem to happen? Is my USB drive got broken? How to fix the flash drive not recognized issue? Also, can I recover data from the USB flash drive not recognized?'

Solved: USB not recognized is the common problem reported many users, it could be broken or other reason caused the drive error. But don't worry, you can follow the next guide to fix the flash drive not recognized error on Windows and Mac, then recover files from flash drive with Recoverit Data Recovery program.

What Caused the Flash Drive Not Recognized on Computer?

Several root causes would result in the not recognized flash drive issue. They should be addressed so that you will not need to deal with the issue(s) for a long period.

Port Related Issues:: To determine if this is a port problem, test every USB port that you have with different flash drives. This could be either hardware or software issues or both. In this case, you would need a professional to help you correct this.

USB Formatting Issue: This is the most probable reason your computer could not detect your flash drive. The inability to format flash drive properly before the first use could cause problems later on.

Driver Issue: The drivers may not be available, corrupted, or outdated which would make the flash drive not Recognized.

Hard Drive Related Issues: A glitch in your machine's hard drive will not allow anything on it to work in a good and perfect way. This hardware issue should be addressed because it will affect more than your computer's ability to recognize a flash drive.

Operating System Related Issues: Sometimes, if your OS is not updated with the necessary updates as often as possible, it would cause the system to not recognize the flash drive. This could be simply rectified by updating the necessary components.

4 Ways to Fix the USB Flash Drive Not Recognized Problems on Windows

Depending on what is the root cause of the problem, you may only need to do one of these four steps or all of them. Follow these solutions step-by-step to resolve your problem.

Way 1: Scan Flash Drive to Find the Issue

1. Plug the flash drive into your USB port.
2. Go to My Computer and right-click on the flash drive. Open the Properties

3. Open the Tools tab and click Check now'¦

4. It may take some time to complete the scan. Once finished, it will tell you what the flash drive's problem is.

Way 2: Reformat the Flash Drive

1. Right-click on the flash drive and click on Format'¦, the Format window will pop up.

2. Under the File system toggle it between NTFS and FAT32. Click Start.

Way 3: Perform driver updates

1. Open the Run command and type in msc in the field. Click OK.

2. This will open the Device Manager. Find the Universal Serial Bus controllers.

3. Expand the menu and right-click on the Generic USB Hub. Click on Update Driver Software'¦

Way 4: Operating System Updates

1. Go to Control Panel, then System and security.

2. Under the Windows Update section, click on Check for Updates.

3. If it is not updated (the notification is not green in color), update it accordingly as indicated by the system.

4. Follow the updating wizard and restart your computer accordingly.

Video Tutorial on How to Fix USB Device Not Recognized

3 Ways to Fix the Flash Drive Not Recognized Problem on Mac

Like in Windows, your resolution method will be determined by the root cause of the problem. These are the three ways that you can do to fix flash drive not Recognized issue.

Way 1: Manually Connect the Flash Drive

1. Go to Application and click on Utilities.

2. A pop-up window will appear and click on the highlighted commands as marked in the image below:

3. Under Devices, click External Devices to manually connect the unrecognizable flash drive.

Way 2: Retune PRAM

1. Shut down your Mac.
2. Press the Power button and subsequently hold down the Command-Option-P-R This should be done before the grey screen appears.

3. Your Mac should reboot itself. Let it go after the start-up chime.

Way 3: Format Mac's Drive

1. Press the Command-Spacebar buttons simultaneously, plug in the flash drive and go to the Application Click on the Disk Utility option.

2. You will be able to find the flash drives that need to be fixed in the left panel.

3. Click on the Erase button to complete the process.

What's Next?

Pny 64gb Flash Drive Not Recognized Expired

Now that the flash drive not Recognized problem is solved on your Windows or Mac computer, make sure you had back-up all important documents in the flash drive. This is to ensure that you will be able to access the files stored in the flash drive should it happens again.

You should also check if there is any accidental data loss from the drive. Should you find things missing, use a flash drive data recovery tool to help you recover loss documents do this immediately before it is overwritten by new data.

How to Recover Data from Flash Drive Not Recognized on Windows

When you fix the USB flash drive not recognized with format solution, all your data on the drive will be got formatted and lost. On this guide, we will show you how to recover data from flash drive not recognized on Windows. Recoverit Data Recovery software can easily help you recover lost files from flash drive, even the drive got damaged/corrupted, formatted, virus attack and the file system crashed.

Recoverit - The Best USB Flash Drive Recovery Software

• Undeleted files from flash drive which not recognized on Windows and Mac.
• Recover files from USB flash drive due to accidentally deleted, formatted and damaged/corrupted.

Steps to Recover Lost Data from Flash Drive

Download and install Recoverit Flash Drive Recovery on your computer, follow the next simple steps to perform flash drive data recovery on Windows computer.

Step 1. Launch Recoverit Data Recovery program, select the 'External Device Recovery' mode to get started.

Step 2. Make sure your flash drive detected on the computer, select it, and click 'Start' to proceed.

Step 3. The flash drive recovery software will start to scan the device to search and restore your data files.

Step 4. Finally, you can check all the recovered files. Select your data and recover back by clicking the 'Recover' button.

If you are a MAC user, you should download Recoverit Data Recovery for Mac or follow the guide to perform flash drive recovery on Mac.

USB Solution

Recover USB Drive

Format USB Drive

Fix/Repair USB Drive

Know USB Drive

Flash drive flashing red but not working is one of the commonest issues related to USB drives. The possible causes and workable solutions vary according to your specific situation. If your flash drive is detected but inaccessible, don't hesitate to use EaseUS Data Recovery Wizard to retrieve your files immediately. If it is blinking but not detected, don't worry. There are potential fixes provided below.

If your flash drive is blinking but not readable or inaccessible on your computer, stay here. By following the provided tips, you will make it work again without losing any data:

My flash drive continuously blinking red, is it dead

'I have a 64GB Lexar USB flash drive which has data on it. It appears functioning abnormally because after putting it in the computer, the light is flashing and blinking red. I'm not sure if the red light is the problem, but I can't access the drive due to an error saying 'G:/ is not accessible. The file or directory is corrupted and unreadable.'

Some flash drives, like Lexar flash drives, are equipped with an LED light that indicates the status of your device. Whether your flash drive light flashes or how it flashes always imply some information about your device.

Health Check for Blinking Flash Drive

Depending on the manufacturer or model, the tiny beam of light coming from a specific type of flash drive varies, it can be red, blue, green or orange, which conveys messages of data transfer, data reading or writing. Following are some examples that are supposed to help you determine whether your flash drive blinking red is normal or not.

√ YES

• Fast and repeatedly blinking red of a flash drive when it's first plugged in and powered on. After then, the light will turn off.
• Red LED gradually growing brighter soon after a slow dimming.
• Flash drive starts blinking only when data transfer.

× NO

Pny 16gb Flash Drive Problems

• Erratically blinking red and making a clicking noise.
• Flash drive LED light stays on without flashing.
• Flash drive blinking but not working/recognized or detected by Windows.

If you can't determine whether your flash drive is dead, you can follow the next part to check and repair your device.

How to Fix Flash Drive Flashing Red But Not Working

Pny 64gb Flash Drive Not Recognized Usb

Both a flash drive detected but inaccessible and flash drive not detected are symptoms of a flash drive not working. But the solutions to these situations vary. Thus, before you fix your device, you need to check whether your USB flash drive is recognized in Disk Management:

Step 1. Keep your USB flash drive connected.

Step 2. Right-click 'This PC' and choose 'Manage'.

Step 3. Go to 'Disk Management'. Then you will find your device in one of the following situations:

• The flash drive shows up in Disk Management but it is inaccessible i.e. showing unallocated space or RAW
• The flash drive blinking red but not detected (no showing up in Disk Management)

Situation 1. Flash drive flashing red and inaccessible

If your flash drive can still be recognized by your computer but inaccessible, congratulations, you have a high chance to bring your device back to normal. If your device shows unallocated or RAW, recover data from your device and then partition or format your flash drive following the details below. If you see your USB flash drive showing 'No Media' or 'Not Initialized', go to the related article to learn how to cope with it.

Procedure 1. Recover data from inaccessible blinking red flash drive

Mostly, if the USB flash drive will blinking as red on your computer, it will become inaccessible on your computer.

In this case, your USB flash drive or other storage devices will also display as RAW or unallocated space in Disk Management. Given that, you need hard drive recovery software - EaseUS Data Recovery Wizard for help.

It allows you to retrieve the files stored on your blinking red flash drive easily in only 3 steps:

Step 1. Choose the flash drive to scan.

Launch EaseUS Data Recovery Wizard and choose your flash drive where you lost important files. Click 'Scan' to start.

Step 2. Check and preview found flash drive data.

After a quick and advance scan, you can quickly locate a specific type of file by using the Filter feature as well as the Search.

• Filter: A quick way to your wanted files.
• Search: e.g. File name/file extension.

Step 3. Restore flash drive data.

After checking and finding lost flash drive files, select them and click Recover to restore. You shall save the found files to a safe location on your PC rather than to your flash drive.

With data safely recovered to another location, you can start partitioning or formatting the flash drive in your preferred way which usually fixes the corruption problem and brings it back to life.

Procedure 2. Partition/Format the flash drive

If your blinking flash drive shows as unallocated space, you will need to partition the device after the data recovery process in order to prepare it for data storage. While if your device has a RAW file system, you will need to format the USB flash drive to make it usable again.

Situation 2. Flash drive blinking but not recognized

The USB flash drive blinking but not detected can either result from minor connection issue or serious hardware failure of your device. If you don't know what the cause is, follow the tips below one by one to fix your problematic flash drive.

Method 1. Check the USB connection

Pny 64gb Flash Drive Not Recognized Drive

There are two ways you can apply to check your flash drive connection, including:

• Change the USB port (if you are using a desktop, connect your USB flash drive to one of the rear ports)
• If there is another computer available, connect your device to the machine

Method 2. Update device driver

An outdated device driver is also likely to be the reason why your USB flash drive is blinking red but not working. Therefore, updating your device driver is also a solution worth trying.

Step 1. Connect the USB flash drive to PC, right-click on 'This PC' (in Windows 10) and choose 'Properties'.

Step 2. Click 'Device Manager' then expand “Disk drives”. Find and right-click the problematic USB drive and select 'Update driver'

Step 3. Click 'automatically search for driver software online'.

Step 4. Wait for the driver to be updated, then reboot your computer. Afterward, you can try to reconnect your USB flash drive to PC and check whether the USB drive shows up or not.

Method 3. Send your device for manual repair

If your USB flash drive remained unresponded to the fixes above, I'm afraid there are physical corruptions on your device. In such a case, sending your device for manual repair is recommended. Is your device still under warranty? If so, you can get it replaced.

For more possible fixes, you can refer to the article about Seagate external hard drive light blinking but not working or the one about USB flash drive not showing up.

The Bottom Line

What can cause a flash drive light blinking but not working? The possible causes could be many, i.e. file system error, I/O device error, connection issue, or hardware failure. This should remind you of two things: grow a good habit of using a USB flash drive and make a backup of your important files somewhere else.